48 Series Flat Belts

48FB Series Side Mount Drive Flat Belt Conveyors

48FB Series Side Mount Drive Flat Belt Specifications

Specifications:

  • Frame Height: 51mm (2”)
  • Widths: 48mm—650mm (1.8” - 25.5”)
  • Lengths:  375mm — 4572mm  (15” - 15 ft)
  • Speeds: Up to 400 FPM
  • Loads Up to 150 lbs
  • Motor Outbound for Cleated Applications
  • Dual “T” Slots (8.1mm) for More Mounting Area
  • Sealed Bearings
  • Stainless Steel Slider Bed
  • 16mm Diameter Drive Shaft
  • Metric Fasteners
  • Welded Endless Belts
  • Variable  or Fixed Speed
  • Optional  “V” Guides Belts
  • Optional 12mm Transfer Nose
  • Optional Multiple Lane with Single Drive

Features:

  • Low Profile
  • Offset Drive Package for Access Under the Pulley
  • Drive Location Up for Bottom of Conveyor Clearance
  • Drive Location Down for Top of Belt Clearance
  • Belt is the Highest Point Allows you to Pass Part Wider  than the Conveyor
  • Heavy Wall Extrusion
  • Fully Assembled Ready to Install
  • Dual “T” Slots (8.1mm) for More Mounting Area
  • Longer Bearing Holders for More Take Up
  • Bright Anodized Extrusion

 

 

Sign Up and Configure

Configure Now

48FB Series Side Mount Down Flat Belt Small Motor Inline

 

48FB Series Side Mount Down Flat Belt  Large Motor Inline

 

48FB Series Side Mount Up Flat Belt Small Motor Inline

 

48FB Series Side Mount Up Flat Belt Large Motor Inline

 

48FB Series Clamp Bearing used on 400mm Frames an Wider

10mm Nose Bar 48FB Series Flat Belt Conveyor

 

 

Standard Sizes (48FB Series Side Mount Drive)

Note:

FW (Frame Width - 15mm (.590”) = BW (Belt Width)

OAL (Overall Length) = Conveyor Tip to Tip

Frame Widths over 400mm Require “V” Guided Belts

Clamp Style Bearing are Used on Widths over 400mm and High Speed Applications

Transfer Nose Bars on Idler Ends Only

Transfer Nose Bars on Conveyor Speeds Less Than 75 Feet Per Minute

Need More Information?

Submit