48 Series Flat Belts

48FB Series No Drive Flat Belt Conveyors

48FB Series No Drive Flat Belt

Specifications:

  • Frame Height: 51mm (2”)
  • Widths: 48mm—650mm (1.8” - 25.5”)
  • Lengths:  457mm — 4572mm  (18” - 15 ft)
  • Speeds: Up to 400 FPM
  • Loads Up to 150 lbs
  • Sealed Bearings
  • Stainless Steel Slider Bed
  • 16mm Diameter Drive Shaft
  • Welded Endless Belts
  • Metric Fasteners
  • Variable  or Fixed Speed
  • Optional  “V” Guides Belts
  • Optional 12mm Transfer Nose
  • Optional Multiple Lane with Single Drive

Features:

  • Low Profile
  • Heavy Wall Extrusion
  • Fully Assembled Ready to Install
  • Dual “T” Slots (8.1mm) for More Mounting Area
  • Belt is the Highest Point Allows you to Pass Part Wider than the Conveyor.
  • Longer Bearing Holders for More Take Up
  • Bright Anodized Extrusion

 

Sign Up and Configure

Configure Now

48FB Series Flat Belt No Drive

 

48FB Series Clamp Bearing used on 400mm Frames an Wider

10mm Nose Bar 48FB Series Flat Belt Conveyor

 

 

Standard Sizes (48FB Series No Drive)

Conveyor Frame Width (FW)

Conveyor Belt Width

(BW)

Conveyor Length

(OAL)

48mm (1.9”)

33mm (1.3”)

457mm (18”) to 4572mm (15’)

74mm (2.9”)

59mm (2.3”)

457mm (18”) to 4572mm (15’)

96mm (3.8”)

81mm (3.2”)

457mm (18”) to 4572mm (15’)

117mm (4.6”)

102mm (4”)

457mm (18”) to 4572mm (15”)

150mm (5.9”)

135mm (5.3”)

457mm (18”) to 4572mm (15’)

168mm (6.6”)

153mm (6”)

457mm (18”) to 4572mm (15’)

200mm (7.9”)

185mm (7.3”)

457mm (18”) to 4572mm (15’)

218mm  (8.6”)

203mm (8”)

457mm (18”) to 4572mm (15’)

250mm (9.8”)

235mm (9.3”)

457mm (18”) to 4572mm (15’)

300mm (11.8”)

285mm (11.2”)

457mm (18”) to 4572mm (15’)

320mm (12.6”)

305mm (12”)

457mm (18”) to 4572mm (15”)

350mm (13.8”)

335mm (13.2”)

457mm (18”) to 4572mm (15’)

400mm (15.7”)

385mm (15.2”)

457mm (18”) to 4572mm (15’)

450mm (17.7”)

435mm (17.1”)

457mm (18”) to 4572mm (15’)

475mm (18.7”)

460mm (18”)

457mm (18”) to 4572mm (15’)

500mm (19.7”)

485mm (19.1”)

610mm (24”) to 4572mm (15’)

550mm (21.6”)

535mm (21.1”)

610mm (24”) to 4572mm (15’)

600mm (23.6”)

585mm (23”)

610mm (24”) to 4572mm (15’)

625mm (24.6”)

610mm (24”)

610mm (24”) to 4572mm (15’)

650mm (25.6”)

635mm (25”)

610mm (24”) to 4572mm (15’)

Note:

FW (Frame Width - 15mm (.590”) = BW (Belt Width)

OAL (Overall Length) = Conveyor Tip to Tip

Frame Widths over 400mm Require “V” Guided Belts

Clamp Style Bearing are Used on Widths over 400mm and High Speed Applications

Transfer Nose Bars on Idler Ends Only

Transfer Nose Bars on Conveyor Speeds Less Than 75 Feet Per Minute

 

 

 

Need More Information?

Submit